Ordering the Right Connector Combination for a Mixed DC Vehicle Group

By admin

EVB | Workplace EV Charging | Reliable & Intelligent Management

Order a connector configuration against a verified vehicle list, not against a catalogue that shows every connector the manufacturer may offer. Two charging cables do not establish that both fit every vehicle, that both can be used simultaneously or that each provides the cabinet’s advertised maximum power.

For a mixed direct-current, or DC, vehicle group, connect three records: what each vehicle accepts, what each ordered output supplies and which vehicles need service at the same time. This turns a broad compatibility claim into an order that can be checked.

Begin with the vehicles that will actually arrive

Record the relevant vehicle model and variant, charging inlet and manufacturer-stated DC charging requirements. Include imported vehicles and specialist fleet vehicles where they form part of the expected group. Market assumptions are not enough to identify an individual vehicle’s equipment.

Distinguish physical connector compatibility from the other conditions needed for charging. The vehicle and charging equipment still need compatible communication and electrical operating ranges. A familiar-looking plug does not prove that every required charging function has been demonstrated.

Ask the vehicle supplier for the relevant information when it is missing. Keep unknowns visible until resolved instead of giving the charger vendor an apparently complete but guessed fleet specification.

Translate catalogue options into an ordered pair

The EVB DC charging portfolio separates wall-mounted, floor-mounted and split charger families. That public product-family distinction is a starting point for procurement; it does not identify the connector combination supplied with a particular order.

Request the exact configuration for each output, including its connector, cable arrangement and supported operating envelope. Match the response to the quotation and later to the equipment schedule. A phrase such as “CCS and CHAdeMO available” describes options until the order states which are fitted.

CCS means Combined Charging System. Where a supplier lists different CCS variants, retain the full designation rather than shortening them all to “CCS”. Do the same for other connector families and market-specific configurations.

Check the simultaneous vehicle requirement

Consider an illustrative vehicle group in which most vehicles require CCS2 while a smaller legacy group requires CHAdeMO. A two-cable unit ordered with one of each may serve either group individually, but that does not establish that it can serve two CCS2 vehicles at once.

If two CCS2 vehicles routinely arrive together, compare that required pair with the actual output arrangement. Possible procurement responses include a different supported connector configuration, another charging point or a different operating schedule. The appropriate answer depends on the equipment offered and the service requirement.

Also establish whether the two outputs support simultaneous charging and how available power is shared. Connector count alone is not proof of two independent charging ports or two full-power services.

Check the installed cable arrangement

Put the proposed vehicle positions beside the charger layout. The correct connector must reach the relevant vehicle inlet without an unsuitable cable route. Include the positions used by larger vehicles and the space needed for people to reach the controls.

Do not plan around an unverified adapter. Any adapter proposal needs explicit support from the responsible vehicle and equipment parties, along with an assessment of the intended application. An adapter should not be used to fill a compatibility gap left unresolved in the purchase order.

Keep user handling in the assessment too. Cable reach, weight, stiffness and release can affect whether the intended users can complete a session in the final layout.

Make delivery acceptance match the order

Record the ordered configuration by charger and output. At delivery and commissioning, check the actual labels and supplied connectors against that record. Include representative vehicle-and-output combinations in the agreed service tests.

For each combination, record the vehicle variant, output identifier, software configuration and result. Keep a physical mismatch separate from an authorisation or communications failure so that the correct supplier can investigate it.

The purchase is well defined when the buyer can trace every expected vehicle group to a supplied output and explain which pairs can charge together. That is more dependable than treating a multi-connector catalogue as a promise that one configuration covers every fleet.